## page was copied from Wireless
#acl HlpLabGroup:read,write,delete,revert All:read
#format wiki
#language en
#pragma section-numbers 3

= Wireless =

== Coverage ==
The wireless access point for the HLP Lab is in Meliora 123. Within the lab there is a pretty strong signal, but if you are anywhere else, use the University's wireless.

== Connecting ==

 * SSID: hlplab
 * Security: WPA2 Enterprise
 
=== Mac OS X ===
 1. Select hlplab from the available wireless networks
 2. When prompted, enter the username and password you would use to log into any of the computers in the lab
 3. The first time you connect, it will complain about a self-signed certificate. Just click "continue" to accept it.

=== Linux ===
A modern Linux such as Ubuntu or Fedora should pop up an authentication dialog with fields like these:
 * Wireless security: WPA & WPA2 Enterprise. 
 * Authentication: PEAP
 * Anonymous identity: leave this blank
 * CA certificate: leave it set to None
 * Inner authentication: MSCHAPv2
 * Username: your slate username
 * Password: your slate password

After you hit Connect it might give you a certificate warning, and if it does, just click Ignore.

=== Windows ===
Unfortunately, it is much, much harder to do in Windows.
==== Windows XP ====

 1. From the Start Menu go to Connect To and select Wireless Network Connection
 2. Select hlplab from the available wireless networks and click Connect. It will probably fail because Windows tries to connect to WPA2 Enterprise networks the wrong way (unless the authentication server is running Windows).
 3. Click on "Change advanced settings"
 4. Select the Wireless Networks tab, then select hlplab and click the Properties button.
   1. On the Association tab, make sure "Network Authentication" is WPA2 and "Data encryption" is AES.
   2. On the Authentication tab, make sure "EAP type" is "Protected EAP (PEAP)" and click "Properties"
     1. Uncheck "Validate server certificate"
     2. Under "Select Authentication Method", select "Secured password (EAP-MSCHAP v2)" and click "Configure..." and in the dialog box, uncheck "Automatically use my Windows logon name and password (and domain if any)"
 5. Try connecting again. This time it should prompt for your username and password. Use the login you would use for any of the computers in the lab.

==== Windows Vista ====
Should be similar or the same as Windows 7. (See below.) I don't have a laptop handy with Vista. Maybe an RA with Vista can help after break.

==== Windows 7 ====
 1. Open the Control Panel and click on "Network and Sharing Center"
 2. Click on "Manage wireless networks"
 3. Click on the "Add" button and select "Manually create a network profile"
   1. "Network name" is hlplab
   2. "Security type" is WPA2-Enterprise
   3. "Encryption key" is AES
   4. Click "Next"
   5. Click "Change connection settings"
   6. Click the "Security" tab, and then under "Choose a network authentication method" make sure "Microsoft: Protected EAP (PEAP)" is selected and click "Settings"
     1. Uncheck "Validate server certificate"
     2. Under "Select Authentication Method", select "Secured password (EAP-MSCHAP v2)" and click "Configure..." and in the dialog box, uncheck "Automatically use my Windows logon name and password (and domain if any)"
   7. Click the "Advanced settings" button and under the "802.1X settings" tab
     1. Check the "Specify authentication mode" and select "User authentication"
     2. Click "Save credentials"
     3. Enter your username and password. Use the login you would use for any of the computers in the lab.
   8. If it fails, you might have to go back and do step 6 again.
    
=== iPhone / iPod Touch ===
 1. Open "Settings"
 2. Click on Wi-Fi, and then turn it on if it's off
 3. Click on "Other...", even if you see hlplab. (First time only, because it's not set up. In future click on hlplab.)
  1. For "Name" enter hlplab
  2. Click on "Security" and choose "WPA2 Enterprise"
  3. Click on "Username" and put in your username.
  4. Click on "Password" and put in your password.
  5. Click "Join"
  6. It will ask about a self-signed certificate. Just click "accept" to accept it.

=== Android based phone ===
 1. Open "Settings"
 2. Click on "Wireless controls"
 3. Make sure the "Wi-Fi" checkbox is checked.
 4. Click on "Wi-Fi settings"
 5. Click on hlplab
 6. In the dialog that pops up 
  1. EAP method: PEAP
  2. Phase 2 Authentication: MSCHAPv2
  3. CA certificate: N/A
  4. Client certificate: N/A
  5. Private key password: leave blank
  6. Identity: username
  7. Anonymous identity: leave blank
  8. Wireless password: your password