= NEW GUIDE = https://wiki.bcs.rochester.edu/ApLab/DPI%20Photodiode ''' ignore below this line ''' ---- == Photodiode == This remade photodiode operates exactly the same as the old one, but with the added feature of adjustable sensitivity. === Circuit layout === {{attachment:circuit_layout.jpg|ciruit layout|width=512}} === Adjusting Sensitivity === Move the jumper (the removable red object near the bottom-right of the board) to a different set of pins to the left or right. There are 4 gain settings on this board. With increasing resistance corresponding to an increase in gain 1. 0 Ohm (gain=1) 2. 5.7M Ohm 3. 10M Ohm 4. 20M Ohm So far, we've found 10M Ohm to be acceptable for our purposes {{attachment:board_layout.jpg|board layout|width=512}} === Photodiode Mount === The CAD file for the monitor mount is here: {{attachment:mount_render.png}} [[attachment:photodiode_monitor_mount.step]] == Instructions to use photodiode with LabJack ADC board: == Scan Rate: 1024 Hz Number of scans: 2048 [[attachment:LabJack_photodiode.pdf|Instructions]]