Differences between revisions 4 and 8 (spanning 4 versions)
Revision 4 as of 2024-07-03 17:25:12
Size: 1153
Comment:
Revision 8 as of 2024-07-03 17:30:42
Size: 1323
Comment:
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
1) Turn on the power to the Logitech system by pressing the power button ONCE: 1) Turn on the power to the Logitech system by pressing the power button on the wall ONCE:
Line 7: Line 7:
[[attachment:power.jpg]] {{attachment:power.jpg}}
Line 9: Line 9:
2) Once turned on, look at the shelf above the power button and see if the two power lights are on. If they are, system is on: 2) After a few seconds, look at the shelf above the power button where the system's controllers reside and see if the two power lights are on. If they are, system is on:

{{attachment:shelf.jpg}}
Line 13: Line 15:
{{attachment:usb.jpg}}
Line 14: Line 18:
Line 17: Line 22:
{{attachment:remote.jpg}}
Line 18: Line 25:

{{attachment:remote2.jpg}}

Instructions for using the Logitech Rally AV system in the Kresge Room

The Logitech Rally AV system is used for hybrid meetings and includes a video camera, microphone array, and speakers. Remote attendees will be able to hear everybody in the Kresge Room.

Using the system

1) Turn on the power to the Logitech system by pressing the power button on the wall ONCE:

power.jpg

2) After a few seconds, look at the shelf above the power button where the system's controllers reside and see if the two power lights are on. If they are, system is on:

shelf.jpg

3) Connect the USB cable to your laptop (or the laptop from the podium if using that). This cable provides microphone/speaker/camera connectivity:

usb.jpg

4) In the settings for your videoconferencing app (presumably Zoom), set the video/microphone/speaker device to be "Logitech Rally"

5) The remote control for the Rally system looks like this...

remote.jpg

...and here are what the buttons are for...

remote2.jpg

Presssing the "1" button will have the camera automatically zero in on the projection screen.

Pressing the "2" button will have the camera automatically zero in on both the projection screen and the whiteboard.

KresgeAv (last edited 2024-07-03 18:20:18 by WikiAdministrator)

MoinMoin Appliance - Powered by TurnKey Linux