Differences between revisions 1 and 26 (spanning 25 versions)
⇤ ← Revision 1 as of 2012-05-21 18:17:17 →
Size: 2897
Editor: WikiAdministrator
Comment:
← Revision 26 as of 2022-08-02 13:34:04 → ⇥
Size: 2622
Editor: WikiAdministrator
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
== Instructions for the new Xerox Phaser 4600/DN in G-4106 or G-3000 ==
'''The address for the printer in G-4106 is "cvs005a.urmc-sh.rochester.edu" '''
Line 2: Line 4:
'''The address for the printer in G-3000 is "cvs004.urmc-sh.rochester.edu" '''
Line 3: Line 6:
Windows XP === Windows 10 ===
1. Download and run the printer driver installer:
Line 5: Line 9:
1. Click on Start -> Settings -> Printers. Select the "Add Printer" option.  64-bit version: https://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600/Phaser_4600_Windows_x64.exe
Line 7: Line 11:
2. Select the option "Local printer attached to this computer", but UNcheck "Automatically detect and install my Plug and Play printer". Click "Next". The installer should store the printer files in the "c:\xerox" folder, and the Windows "Add Printer" wizard should automatically launch afterwards.
Line 9: Line 13:
3. Click on "Create a new port" and specify the type of port as "Standard TCP/IP Port". Click "Next", then "Next" again in the resulting window. 2. The computer will automatically try to scan for printers. Click on the "The printer that I want isn't listed" link at the bottom of the window.
Line 11: Line 15:
4. On the "Add Port" page, enter the address of the printer in the "IP address" field (it should appear in both fields as you type it). Click "Next". 3. Select the option "Add a local printer or network printer with manual settings". Click "Next".
Line 13: Line 17:
5. Click "Finish" in the next window. 4. Click on "Create a new port" and specify the type of port as "LPR Port". Click "Next".
Line 15: Line 19:
6. In the next window, select the manufacturer of your printer from the left column, then the model from the right column, and click "Next". If the printer model doesn't appear, then you need to download the correct driver for the printer. Check here for a driver: BCS-CVS software. If you don't see it, then you nee to go to the manufacturer's website and download the necessary printer driver. 5. In the resulting window, enter the address of the printer (listed at top of this wiki) in both fields. Click "Next".
Line 17: Line 21:
7. For the Printer name, enter something descriptive. Click "Next". 8. In the next window click on "Have Disk". Navigate to the C:\Xerox directory where the driver was decompressed to.
Line 19: Line 23:
8. In the next window, click on "Do not share this printer". Click "Next". 9. 2 printers will appear in a list...select "Xerox Phaser 4600". Click "Next".
Line 21: Line 25:
9. In the next window, do not printer a test page. Click "Next". 10. For the Printer name enter "CVS005a". Click "Next".
Line 23: Line 27:
10. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done. 11. In the next window, click on "Do not share this printer". Click "Next".
Line 25: Line 29:
Windows 7 12. In the next window, print a test page if you like. Click "Next".
Line 27: Line 31:
1. Click on Start -> Devices and Printers. Select the "Add a Printer" option. 13. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done.
Line 29: Line 33:
2. Select the option "Add a local printer". === Mac OSX ===
 * Download the Xerox printer installation program: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600/Phaser4600_Mac.dmg.
Line 31: Line 36:
3. Click on "Create a new port" and specify the type of port as "Standard TCP/IP Port". Click "Next".  * Double-click on the file to open the installer...a window should appear with an installer called "Xerox Print Drivers 2.59.0" in it. Double-click on that file to launch the installer.
Line 33: Line 38:
4. On the "Add Printer" page, enter the address of the printer in the "Hostname or IP address" field (it should appear in both fields as you type it). Click "Next".  * Accept the default options during install.
Line 35: Line 40:
5. In the next window, select the manufacturer of your printer from the left column, then the model from the right column, and click "Next". If the printer model doesn't appear, then you need to download the correct driver for the printer. Check here for a driver: BCS-CVS software. If you don't see it, then you nee to go to the manufacturer's website and download the necessary printer driver.  * Once it finishes, it will display a "Select A Printer" window with three icons in it. Click on the icon on the RIGHT.
Line 37: Line 42:
6. Expand the driver installer to a folder on your computer. Once done, click on the "Have Disk" button on this page of the printer setup. In the resulting window, enter the directory that the installer decompressed itself to. You will then be shown the printer drivers you downloaded....select the correct one and click on "Next".  * Enter the printer's address: '''cvs005a.urmc-sh.rochester.edu''' for the printer in G-4106, or '''cvs004.urmc-sh.rochester.edu''' for the printer in G-3000.
Line 39: Line 44:
7. For the Printer name, enter something descriptive. Click "Next".  * From the printer model pulldown menu, select '''Xerox Phaser 4600'''. The list may be long...the 4600 is near the middle.
Line 41: Line 46:
8. In the next window, click on "Do not share this printer". Click "Next".  * Click on Continue.
Line 43: Line 48:
9. In the next window, do not printer a test page. Click "Next".  * On the next page, check or uncheck the option to print a test page or make this your default printer as you see fit.
Line 45: Line 50:
10. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done.  * Click on Continue. At this point, you're done.

Instructions for the new Xerox Phaser 4600/DN in G-4106 or G-3000

The address for the printer in G-4106 is "cvs005a.urmc-sh.rochester.edu"

The address for the printer in G-3000 is "cvs004.urmc-sh.rochester.edu"

Windows 10

1. Download and run the printer driver installer:

The installer should store the printer files in the "c:\xerox" folder, and the Windows "Add Printer" wizard should automatically launch afterwards.

2. The computer will automatically try to scan for printers. Click on the "The printer that I want isn't listed" link at the bottom of the window.

3. Select the option "Add a local printer or network printer with manual settings". Click "Next".

4. Click on "Create a new port" and specify the type of port as "LPR Port". Click "Next".

5. In the resulting window, enter the address of the printer (listed at top of this wiki) in both fields. Click "Next".

8. In the next window click on "Have Disk". Navigate to the C:\Xerox directory where the driver was decompressed to.

9. 2 printers will appear in a list...select "Xerox Phaser 4600". Click "Next".

10. For the Printer name enter "CVS005a". Click "Next".

11. In the next window, click on "Do not share this printer". Click "Next".

12. In the next window, print a test page if you like. Click "Next".

13. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done.

Mac OSX

  • Download the Xerox printer installation program: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600/Phaser4600_Mac.dmg.

  • Double-click on the file to open the installer...a window should appear with an installer called "Xerox Print Drivers 2.59.0" in it. Double-click on that file to launch the installer.
  • Accept the default options during install.
  • Once it finishes, it will display a "Select A Printer" window with three icons in it. Click on the icon on the RIGHT.

  • Enter the printer's address: cvs005a.urmc-sh.rochester.edu for the printer in G-4106, or cvs004.urmc-sh.rochester.edu for the printer in G-3000.

  • From the printer model pulldown menu, select Xerox Phaser 4600. The list may be long...the 4600 is near the middle.

  • Click on Continue.
  • On the next page, check or uncheck the option to print a test page or make this your default printer as you see fit.
  • Click on Continue. At this point, you're done.

Phaser4600Help (last edited 2022-08-02 13:38:39 by WikiAdministrator)

MoinMoin Appliance - Powered by TurnKey Linux