Differences between revisions 1 and 19 (spanning 18 versions)
⇤ ← Revision 1 as of 2012-05-21 18:17:17 →
Size: 2897
Editor: WikiAdministrator
Comment:
← Revision 19 as of 2022-08-02 13:31:09 → ⇥
Size: 2794
Editor: WikiAdministrator
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
== Instructions for the new Xerox Phaser 4600/DN in G-4106 or G-3000 ==
'''The address for the printer in G-4106 is "cvs005a.urmc-sh.rochester.edu" '''
Line 2: Line 4:
'''The address for the printer in G-3000 is "cvs004.urmc-sh.rochester.edu" '''
Line 3: Line 6:
Windows XP === Windows 10 ===
1. Download and run the printer driver installer appropriate for your copy of Windows:
Line 5: Line 9:
1. Click on Start -> Settings -> Printers. Select the "Add Printer" option.  . 32-bit version: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600/Phaser4600_WinXP_Win7_32bit.exe
 64-bit version: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600/Phaser4600_Win7_64bit.exe
 .
 . The installer should store the printer files in the "c:\xerox" folder, and the Windows "Add Printer" wizard should automatically launch afterwards.
 .
 .
 .
 . 2. The computer will automatically try to scan for printers. Click on the "The printer that I want isn't listed" link at the bottom of the window.
 .
 . 3. Select the option "Add a local printer or network printer with manual settings". Click "Next".
Line 7: Line 20:
2. Select the option "Local printer attached to this computer", but UNcheck "Automatically detect and install my Plug and Play printer". Click "Next". 4. Click on "Create a new port" and specify the type of port as "LPR Port". Click "Next".
Line 9: Line 22:
3. Click on "Create a new port" and specify the type of port as "Standard TCP/IP Port". Click "Next", then "Next" again in the resulting window. 5. In the resulting window, enter the address of the printer (listed at top of this wiki) in both fields. Click "Next".
Line 11: Line 24:
4. On the "Add Port" page, enter the address of the printer in the "IP address" field (it should appear in both fields as you type it). Click "Next". 8. In the next window click on "Have Disk". Navigate to the C:\Xerox directory where the driver was decompressed to.
Line 13: Line 26:
5. Click "Finish" in the next window. 9. 2 printers will appear in a list...select "Xerox Phaser 4600". Click "Next".
Line 15: Line 28:
6. In the next window, select the manufacturer of your printer from the left column, then the model from the right column, and click "Next". If the printer model doesn't appear, then you need to download the correct driver for the printer. Check here for a driver: BCS-CVS software. If you don't see it, then you nee to go to the manufacturer's website and download the necessary printer driver. 10. For the Printer name enter "CVS005a". Click "Next".
Line 17: Line 30:
7. For the Printer name, enter something descriptive. Click "Next". 11. In the next window, click on "Do not share this printer". Click "Next".
Line 19: Line 32:
8. In the next window, click on "Do not share this printer". Click "Next". 12. In the next window, print a test page if you like. Click "Next".
Line 21: Line 34:
9. In the next window, do not printer a test page. Click "Next". 13. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done.
Line 23: Line 36:
10. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done. === Mac OSX ===
 * Download the Xerox printer installation program: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600/Phaser4600_Mac.dmg.
Line 25: Line 39:
Windows 7  * Double-click on the file to open the installer...a window should appear with an installer called "Xerox Print Drivers 2.59.0" in it. Double-click on that file to launch the installer.
Line 27: Line 41:
1. Click on Start -> Devices and Printers. Select the "Add a Printer" option.  * Accept the default options during install.
Line 29: Line 43:
2. Select the option "Add a local printer".  * Once it finishes, it will display a "Select A Printer" window with three icons in it. Click on the icon on the RIGHT.
Line 31: Line 45:
3. Click on "Create a new port" and specify the type of port as "Standard TCP/IP Port". Click "Next".  * Enter the printer's address: '''cvs005a.urmc-sh.rochester.edu''' for the printer in G-4106, or '''cvs004.urmc-sh.rochester.edu''' for the printer in G-3000.
Line 33: Line 47:
4. On the "Add Printer" page, enter the address of the printer in the "Hostname or IP address" field (it should appear in both fields as you type it). Click "Next".  * From the printer model pulldown menu, select '''Xerox Phaser 4600'''. The list may be long...the 4600 is near the middle.
Line 35: Line 49:
5. In the next window, select the manufacturer of your printer from the left column, then the model from the right column, and click "Next". If the printer model doesn't appear, then you need to download the correct driver for the printer. Check here for a driver: BCS-CVS software. If you don't see it, then you nee to go to the manufacturer's website and download the necessary printer driver.  * Click on Continue.
Line 37: Line 51:
6. Expand the driver installer to a folder on your computer. Once done, click on the "Have Disk" button on this page of the printer setup. In the resulting window, enter the directory that the installer decompressed itself to. You will then be shown the printer drivers you downloaded....select the correct one and click on "Next".  * On the next page, check or uncheck the option to print a test page or make this your default printer as you see fit.
Line 39: Line 53:
7. For the Printer name, enter something descriptive. Click "Next".  * Click on Continue. At this point, you're done.
Line 41: Line 55:
8. In the next window, click on "Do not share this printer". Click "Next".

9. In the next window, do not printer a test page. Click "Next".

10. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done.

Instructions for the new Xerox Phaser 4600/DN in G-4106 or G-3000

The address for the printer in G-4106 is "cvs005a.urmc-sh.rochester.edu"

The address for the printer in G-3000 is "cvs004.urmc-sh.rochester.edu"

Windows 10

1. Download and run the printer driver installer appropriate for your copy of Windows:

4. Click on "Create a new port" and specify the type of port as "LPR Port". Click "Next".

5. In the resulting window, enter the address of the printer (listed at top of this wiki) in both fields. Click "Next".

8. In the next window click on "Have Disk". Navigate to the C:\Xerox directory where the driver was decompressed to.

9. 2 printers will appear in a list...select "Xerox Phaser 4600". Click "Next".

10. For the Printer name enter "CVS005a". Click "Next".

11. In the next window, click on "Do not share this printer". Click "Next".

12. In the next window, print a test page if you like. Click "Next".

13. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done.

Mac OSX

  • Download the Xerox printer installation program: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600/Phaser4600_Mac.dmg.

  • Double-click on the file to open the installer...a window should appear with an installer called "Xerox Print Drivers 2.59.0" in it. Double-click on that file to launch the installer.
  • Accept the default options during install.
  • Once it finishes, it will display a "Select A Printer" window with three icons in it. Click on the icon on the RIGHT.

  • Enter the printer's address: cvs005a.urmc-sh.rochester.edu for the printer in G-4106, or cvs004.urmc-sh.rochester.edu for the printer in G-3000.

  • From the printer model pulldown menu, select Xerox Phaser 4600. The list may be long...the 4600 is near the middle.

  • Click on Continue.
  • On the next page, check or uncheck the option to print a test page or make this your default printer as you see fit.
  • Click on Continue. At this point, you're done.

Phaser4600Help (last edited 2022-08-02 13:38:39 by WikiAdministrator)

MoinMoin Appliance - Powered by TurnKey Linux