|
Size: 3893
Comment:
|
Size: 4201
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 11: | Line 11: |
| * Enter the printer's address: '''cvs002.urmc-sh.rochester.edu''' * From the printer model pulldown menu, select "Xerox Phaser 4600". The list may be long...the 4600 is near the middle. |
* Enter the printer's address: '''cvs002.urmc-sh.rochester.edu''' for the printer in G-4106, or '''cvs004.urmc-sh.rochester.edu''' for the printer in G-3000. * From the printer model pulldown menu, select '''Xerox Phaser 4600'''. The list may be long...the 4600 is near the middle. |
| Line 18: | Line 18: |
| Windows XP | == Windows XP == |
| Line 20: | Line 20: |
| 1. Click on Start -> Settings -> Printers. Select the "Add Printer" option. | * Download and run the printer driver installer: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600_WinXP_Win7_32bit.exe. The Windows "Add Printer" wizard should automatically launch afterwards. |
| Line 22: | Line 22: |
| 2. Select the option "Local printer attached to this computer", but UNcheck "Automatically detect and install my Plug and Play printer". Click "Next". | * Select the option "Local printer attached to this computer", but UNcheck "Automatically detect and install my Plug and Play printer". Click "Next". |
| Line 24: | Line 24: |
| 3. Click on "Create a new port" and specify the type of port as "Standard TCP/IP Port". Click "Next", then "Next" again in the resulting window. | * Click on "Create a new port" and specify the type of port as "Standard TCP/IP Port". Click "Next", then "Next" again in the resulting window. |
| Line 26: | Line 26: |
| 4. On the "Add Port" page, enter the address of the printer in the "IP address" field (it should appear in both fields as you type it). Click "Next". | * On the "Add Port" page, enter '''cvs002.urmc-sh.rochester.edu''' for the printer in G-4106, or '''cvs004.urmc-sh.rochester.edu''' for the printer in G-3000, as the address of the printer in the "IP address" field (it should appear in both fields as you type it). Click "Next". |
| Line 28: | Line 28: |
| 5. Click "Finish" in the next window. | * Click "Finish" in the next window. |
| Line 30: | Line 30: |
| 6. In the next window, select the manufacturer of your printer from the left column, then the model from the right column, and click "Next". If the printer model doesn't appear, then you need to download the correct driver for the printer. Check here for a driver: BCS-CVS software. If you don't see it, then you nee to go to the manufacturer's website and download the necessary printer driver. | * In the next window, select the manufacturer of your printer from the left column, then the model from the right column. It's a Xerox Phaser 4600/DN. |
| Line 32: | Line 32: |
| 7. For the Printer name, enter something descriptive. Click "Next". | * For the Printer name, enter something descriptive. Click "Next". |
| Line 34: | Line 34: |
| 8. In the next window, click on "Do not share this printer". Click "Next". | * In the next window, click on "Do not share this printer". Click "Next". |
| Line 36: | Line 36: |
| 9. In the next window, do not printer a test page. Click "Next". | * In the next window, do not printer a test page. Click "Next". |
| Line 38: | Line 38: |
| 10. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done. | * In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done. |
| Line 40: | Line 40: |
| Windows 7 | == Windows 7 == |
| Line 42: | Line 42: |
| 1. Click on Start -> Devices and Printers. Select the "Add a Printer" option. | * Download and run the printer driver installer appropriate for your copy of Windows 7: |
| Line 44: | Line 44: |
| 2. Select the option "Add a local printer". | 32-bit version: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600_WinXP_Win7_32bit.exe |
| Line 46: | Line 46: |
| 3. Click on "Create a new port" and specify the type of port as "Standard TCP/IP Port". Click "Next". | 64-bit version: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600_Win7_64bit.exe |
| Line 48: | Line 48: |
| 4. On the "Add Printer" page, enter the address of the printer in the "Hostname or IP address" field (it should appear in both fields as you type it). Click "Next". | * The Windows "Add Printer" wizard should automatically launch afterwards. |
| Line 50: | Line 50: |
| 5. In the next window, select the manufacturer of your printer from the left column, then the model from the right column, and click "Next". If the printer model doesn't appear, then you need to download the correct driver for the printer. Check here for a driver: BCS-CVS software. If you don't see it, then you nee to go to the manufacturer's website and download the necessary printer driver. | * Select the option "Add a local printer". |
| Line 52: | Line 52: |
| 6. Expand the driver installer to a folder on your computer. Once done, click on the "Have Disk" button on this page of the printer setup. In the resulting window, enter the directory that the installer decompressed itself to. You will then be shown the printer drivers you downloaded....select the correct one and click on "Next". | * Click on "Create a new port" and specify the type of port as "Standard TCP/IP Port". Click "Next". |
| Line 54: | Line 54: |
| 7. For the Printer name, enter something descriptive. Click "Next". | * On the "Add Printer" page, enter '''cvs002.urmc-sh.rochester.edu''' for the printer in G-4106, or '''cvs004.urmc-sh.rochester.edu''' for the printer in G-3000, as the address of the printer in the "Hostname or IP address" field (it should appear in both fields as you type it). Click "Next". |
| Line 56: | Line 56: |
| 8. In the next window, click on "Do not share this printer". Click "Next". | * In the next window, select the manufacturer of your printer from the left column, then the model from the right column, and click "Next". It's a Xerox Phaser 4600/DN. |
| Line 58: | Line 58: |
| 9. In the next window, do not printer a test page. Click "Next". | * Expand the driver installer to a folder on your computer. Once done, click on the "Have Disk" button on this page of the printer setup. In the resulting window, enter the directory that the installer decompressed itself to. You will then be shown the printer drivers you downloaded....select the correct one and click on "Next". |
| Line 60: | Line 60: |
| 10. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done. | * For the Printer name, enter something descriptive. Click "Next". * In the next window, click on "Do not share this printer". Click "Next". * In the next window, do not printer a test page. Click "Next". * In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done. |
Instructions for the new Xerox Phaser 4600/DN in G-4106 or G-3000
updated 21 May 2012
Mac OSX
Download the Xerox printer installation program: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600/Phaser4600_Mac.dmg.
- Double-click on the file to open the installer...a window should appear with an installer called "Xerox Print Drivers 2.59.0" in it. Double-click on that file to launch the installer.
- Accept the default options during install.
- Once it finishes, it will display a "Select A Printer" window with three icons in it. Click on the icon on the RIGHT.
Enter the printer's address: cvs002.urmc-sh.rochester.edu for the printer in G-4106, or cvs004.urmc-sh.rochester.edu for the printer in G-3000.
From the printer model pulldown menu, select Xerox Phaser 4600. The list may be long...the 4600 is near the middle.
- Click on Continue.
- On the next page, check or uncheck the option to print a test page or make this your default printer as you see fit.
- Click on Continue. At this point, you're done.
Windows XP
Download and run the printer driver installer: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600_WinXP_Win7_32bit.exe. The Windows "Add Printer" wizard should automatically launch afterwards.
- Select the option "Local printer attached to this computer", but UNcheck "Automatically detect and install my Plug and Play printer". Click "Next".
- Click on "Create a new port" and specify the type of port as "Standard TCP/IP Port". Click "Next", then "Next" again in the resulting window.
On the "Add Port" page, enter cvs002.urmc-sh.rochester.edu for the printer in G-4106, or cvs004.urmc-sh.rochester.edu for the printer in G-3000, as the address of the printer in the "IP address" field (it should appear in both fields as you type it). Click "Next".
- Click "Finish" in the next window.
- In the next window, select the manufacturer of your printer from the left column, then the model from the right column. It's a Xerox Phaser 4600/DN.
- For the Printer name, enter something descriptive. Click "Next".
- In the next window, click on "Do not share this printer". Click "Next".
- In the next window, do not printer a test page. Click "Next".
- In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done.
Windows 7
- Download and run the printer driver installer appropriate for your copy of Windows 7:
32-bit version: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600_WinXP_Win7_32bit.exe
64-bit version: http://www.cvs.rochester.edu/cvspriv/downloads/Phaser4600_Win7_64bit.exe
- The Windows "Add Printer" wizard should automatically launch afterwards.
- Select the option "Add a local printer".
- Click on "Create a new port" and specify the type of port as "Standard TCP/IP Port". Click "Next".
On the "Add Printer" page, enter cvs002.urmc-sh.rochester.edu for the printer in G-4106, or cvs004.urmc-sh.rochester.edu for the printer in G-3000, as the address of the printer in the "Hostname or IP address" field (it should appear in both fields as you type it). Click "Next".
- In the next window, select the manufacturer of your printer from the left column, then the model from the right column, and click "Next". It's a Xerox Phaser 4600/DN.
- Expand the driver installer to a folder on your computer. Once done, click on the "Have Disk" button on this page of the printer setup. In the resulting window, enter the directory that the installer decompressed itself to. You will then be shown the printer drivers you downloaded....select the correct one and click on "Next".
- For the Printer name, enter something descriptive. Click "Next".
- In the next window, click on "Do not share this printer". Click "Next".
- In the next window, do not printer a test page. Click "Next".
- In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done.