Forks - AP Lab

Printing Forks/E

Printing Instructions (FlashForge Dreamer)

Printer Setup
1. Turn on FlashFroge Dreamer (switch on right side)
2. Load PLA into extruder
3. Preheat
  - Stage: 50 celcius
  - Extruder: 200 celcius
4. Plug USB cable into computer
Software Setup
1. Open FlashPrint software
2. Click "Load" at the top
3. Select .stl file(s)
4. Use "Move" tool on the left to spread out models (only necessary on multiple selection)
5. Select all models (hold down command (Mac) or ctrl (Windows) for multiple selection)
6. Click "Extruder" tool and set it to the appropriate one
7. Click "Print" at the top
8. Select "PLA" for your extruder
9. Select "standard" as resolution
  - While you may be tempted to choose "Hyper" or "High", print quality will diminish
10. Click "Ok"
11. Click "Send GCode" at the top
12. Choose your printer

Files

Forks
View Distance (mm)	STL	Print All (.fpp)	Fusion 360
300	fork_vd300.stl	print_all_forks.fpp	Fork_vd300.f3d
350	fork_vd350.stl		Fork_vd350_600.f3d
400	fork_vd400.stl
450	fork_vd450.stl
600	fork_vd600.stl

Es
View Distance (mm)	STL	Print All (.fpp)	Fusion 360
300	e_vd300.stl	print_all_Es.fpp	E_vd300_600.f3d
350	e_vd350.stl
400	e_vd400.stl
450	e_vd450.stl
600	e_vd600.stl

STEP Files:

Fork_vd350_600.STEP

Forks (last edited 2021-03-15 05:21:32 by SomaMizobuchi)

MoinMoin Appliance - Powered by TurnKey Linux