|
Size: 5868
Comment:
|
← Revision 10 as of 2019-02-20 16:41:49 ⇥
Size: 7413
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 7: | Line 7: |
| These instructions are for configuring a computer to use the Brother HL-L9300 black & white printer in Meliora 249. | These instructions are for configuring a computer to use the Brother HL-L6400DW black & white printer in Meliora 249. |
| Line 26: | Line 26: |
| ''Linux users:'' I have a driver available but as of this date no Linux users will be using this printer so no instructions are currently available |
''Linux users:'' there are two drivers listed for Linux...be sure to download both of them |
| Line 38: | Line 37: |
| 1. Click on Start -> Devices and Printers. Select the "Add a Printer" option. | 3. Click on Start -> Devices and Printers. Select the "Add a Printer" option. |
| Line 40: | Line 39: |
| 2. Select the option "Add a local printer". | 4. Select the option "Add a local printer". |
| Line 42: | Line 41: |
| 3. Click on "Create a new port" and specify the type of port as "LPR Port". Click "Next". | 5. Click on "Create a new port" and specify the type of port as "LPR Port". Click "Next". |
| Line 44: | Line 43: |
| 4. On the "Add Printer" page, enter the address of the printer (listed at top of this wiki) in both fields. Click "Next". | 6. On the "Add Printer" page, enter the address of the printer (listed at top of this wiki) in both fields. Click "Next". |
| Line 46: | Line 45: |
| 5. In the next window click on "Have Disk". Navigate to the directory where the driver was decompressed to (likely your "Downloads" folder) and select the file "BROHL15A". Click "Open", then click "OK" in the next box. | 5. In the next window click on "Have Disk". Navigate to the "/gdi" directory where the driver was decompressed to (likely your "Downloads" folder) and select the file "BROHL15A". Click "Open", then click "OK" in the next box. |
| Line 48: | Line 47: |
| 6. 4 printers will appear in a list...select "Brother HL-L6400DW Series" at the bottom of the list. Click "Next". | 6. Several printers will appear in a list...select "Brother HL-L6400DW Series" at the bottom of the list. Click "Next". |
| Line 50: | Line 49: |
| 6. For the Printer name enter "CVS249A". Click "Next". | 7. For the Printer name enter "CVS249A". Click "Next". |
| Line 52: | Line 51: |
| 7. In the next window, click on "Do not share this printer". Click "Next". | 8. In the next window, click on "Do not share this printer". Click "Next". |
| Line 54: | Line 53: |
| 8. In the next window, do not printer a test page. Click "Next". | 9. In the next window, print a test page if you like. Click "Next". |
| Line 75: | Line 74: |
| 8. In the next window click on "Have Disk". Navigate to the directory where the driver was decompressed to (likely your "Downloads" folder) and select the file "BROHL15A". Click "Open", then click "OK" in the next box. | 8. In the next window click on "Have Disk". Navigate to the "/gdi" directory where the driver was decompressed to (likely your "Downloads" folder) and select the file "BROHL15A". Click "Open", then click "OK" in the next box. |
| Line 77: | Line 76: |
| 9. 4 printers will appear in a list...select "Brother HL-L6400DW Series" at the bottom of the list. Click "Next". | 9. Several printers will appear in a list...select "Brother HL-L6400DW Series" at the bottom of the list. Click "Next". |
| Line 90: | Line 89: |
| 1. Double-click on the downloaded installation package. A volume called "Brother_PrinterDrivers_ColorLaser2" will appear on your desktop. Double-click on the volume to open a window, and then double-click on the "Brother_PrinterDrivers_ColorLaser2.pkg" file in that window. | 1. Double-click on the downloaded installation package. A volume called "Brother_Printer_Drivers" will appear on your desktop and a window with the driver in it should open automatically. If it does not appear automatically, double-click on the volume to open the window, and then double-click on the "Brother_Printer_Drivers.pkg" file in that window. |
| Line 94: | Line 93: |
| 3. Click on the Apple icon in the top left corner of the desktop, then select 'System Preferences'. Click on the 'Print & Fax' preference pane. Once open, click on the'+' button in the bottom left corner of the preference pane and select 'Add Printer or scanner'. Select the 'IP' icon in the resulting window. Printing protocol should be 'LPD'. | 3. Click on the Apple icon in the top left corner of the desktop, then select 'System Preferences'. Click on the 'Print & Fax' or "Printers & Scanners" preference pane (which you see depends on which version of MacOS you have). Once open, click on the'+' button in the bottom left corner of the preference pane and select 'Add Printer or scanner'. Select the 'IP' icon in the resulting window. Printing protocol should be 'LPD'. |
| Line 96: | Line 95: |
| 4. Enter the address of the printer (cvs003a.urmc-sh.rochester.edu). | 4. Enter the address of the printer (listed at the top of this wiki). |
| Line 98: | Line 97: |
| 5. OSX will not automatically detect what kind of printer this is. Click on the 'Use:' pull-down menu and select 'Select Printer Software...'. In the resulting window, select "Brother HL-L9300CDW series CUPS" from the list. Then click the 'OK' button. | 5. OSX will not automatically detect what kind of printer this is. Click on the 'Use:' pull-down menu and select 'Select Printer Software...'. In the resulting window, select "Brother HL-L6400DW series CUPS" from the list. Then click the 'OK' button. |
| Line 101: | Line 100: |
=== Linux (Debian-based distributions like Ubuntu and Mint) === Adding a printer varies a lot between distributions. These instructions are based on Linux Mint 18.3 1. Go to your "Downloads" folder and double-click on the "Brother_L6400_Linux1.deb" file you downloaded. A package installer window should appear...install the package. Repeat this process for the "Brother_L6400_Linux2.deb" file. This second installer will actually create a printer but the settings are wrong. 2. Click on the "Start" menu in the bottom left corner, then select Administration -> Printers. 3. In the "Printers" window you'll see a printer labeled "HLL6400DW". Right-click on it and select "Properties". 4. Change the "Description" field to "CVS249A". Then in the "Device URI" field, click the "Change..." button to the right of it. 5. In the resulting window, click on the "Network Printer" option on the left to expand it, then select "LPD/LPR Host or Printer" from the list. Enter "cvs249a.cvs.rochester.edu" in the "Host:" field on the right, then click the "Probe" button. Once done probing, click the "Apply" button. 6. Back in the printer's properties folder, click the "Print Test Page" button. If a test page prints, you're good to go. Please note that a printer error notification may appear briefly when printing...the printer may be a little slow responding but will wake up and print. |
Brother HL-L6400DW printer setup instructions
These instructions are for configuring a computer to use the Brother HL-L6400DW black & white printer in Meliora 249.
The address of this printer is 'cvs249a.cvs.rochester.edu'.
Step 1: Enabling LPR/LPD support (WINDOWS USERS ONLY)
If you are running Windows, you need to make sure that LPD/LPR printing is enabled on your computer..it's disabled by default. The instructions for enabling it are here: EnableLpdPrinting
Step 2: Download the driver software
Visit this site to download the correct printer driver installation program for your platform:
http://www.cvs.rochester.edu/cvspriv/downloads/Brother_L6400
Mac users: this installer is for OSX 10.12 and newer
Windows users: the package includes a driver for the 64-bit versions of Windows 7/10
Linux users: there are two drivers listed for Linux...be sure to download both of them
Step 3: Add the printer to your computer
Windows 7
1. Download and double-click on the Windows driver installer. If asked if you want to allow the installer to run, click 'Yes'. You'll then see a box asking where you want the driver to be decompressed to, which is usually your Downloads folder. Click the "Decompress" button.
2. The installer will decompress the installer to a folder called "gdi" in your "Downloads" folder.
3. Click on Start -> Devices and Printers. Select the "Add a Printer" option.
4. Select the option "Add a local printer".
5. Click on "Create a new port" and specify the type of port as "LPR Port". Click "Next".
6. On the "Add Printer" page, enter the address of the printer (listed at top of this wiki) in both fields. Click "Next".
5. In the next window click on "Have Disk". Navigate to the "/gdi" directory where the driver was decompressed to (likely your "Downloads" folder) and select the file "BROHL15A". Click "Open", then click "OK" in the next box.
6. Several printers will appear in a list...select "Brother HL-L6400DW Series" at the bottom of the list. Click "Next".
7. For the Printer name enter "CVS249A". Click "Next".
8. In the next window, click on "Do not share this printer". Click "Next".
9. In the next window, print a test page if you like. Click "Next".
10. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done.
Windows 10
1. Download and double-click on the Windows driver installer. If asked if you want to allow the installer to run, click 'Yes'. You'll then see a box asking where you want the driver to be decompressed to, which is usually your Downloads folder. Click the "Decompress" button.
2. The installer will decompress the installer to a folder called "gdi" in your "Downloads" folder.
3. Click on Start, then scroll down the the program list to "Windows System" and click on it to expand it. Select "Control Panel". Within the Control Panel window select "Devices and Printers" (if you don't see it click on the "Large Icons" link in the top right corner. Once the "Devices and Printers" control panel is open, select the "Add a Printer" option.
4. The computer will automatically try to scan for printers. Click on the "The printer that I want isn't listed" link at the bottom of the window.
5. Select the option "Add a local printer or network printer with manual settings". Click "Next".
6. Click on "Create a new port" and specify the type of port as "LPR Port". Click "Next".
7. In the resulting window, enter the address of the printer (listed at top of this wiki) in both fields. Click "Next".
8. In the next window click on "Have Disk". Navigate to the "/gdi" directory where the driver was decompressed to (likely your "Downloads" folder) and select the file "BROHL15A". Click "Open", then click "OK" in the next box.
9. Several printers will appear in a list...select "Brother HL-L6400DW Series" at the bottom of the list. Click "Next".
10. For the Printer name enter "CVS249A". Click "Next".
11. In the next window, click on "Do not share this printer". Click "Next".
12. In the next window, print a test page if you like. Click "Next".
13. In the next (and last) window, click on "Finish". The computer will do what it needs to do, and the printer will be ready to go once the computer is done.
Mac OSX
1. Double-click on the downloaded installation package. A volume called "Brother_Printer_Drivers" will appear on your desktop and a window with the driver in it should open automatically. If it does not appear automatically, double-click on the volume to open the window, and then double-click on the "Brother_Printer_Drivers.pkg" file in that window.
2. The installer is a typical Mac installer...it'll ask you to click continue a few times, then ask for your OSX password, and then it'll install the driver on your computer. Now you need to add the printer.
3. Click on the Apple icon in the top left corner of the desktop, then select 'System Preferences'. Click on the 'Print & Fax' or "Printers & Scanners" preference pane (which you see depends on which version of MacOS you have). Once open, click on the'+' button in the bottom left corner of the preference pane and select 'Add Printer or scanner'. Select the 'IP' icon in the resulting window. Printing protocol should be 'LPD'.
4. Enter the address of the printer (listed at the top of this wiki).
5. OSX will not automatically detect what kind of printer this is. Click on the 'Use:' pull-down menu and select 'Select Printer Software...'. In the resulting window, select "Brother HL-L6400DW series CUPS" from the list. Then click the 'OK' button.
6. Click the 'Add' button to add the printer. After a few seconds the OS should create the printer and you're done.
Linux (Debian-based distributions like Ubuntu and Mint)
Adding a printer varies a lot between distributions. These instructions are based on Linux Mint 18.3
1. Go to your "Downloads" folder and double-click on the "Brother_L6400_Linux1.deb" file you downloaded. A package installer window should appear...install the package. Repeat this process for the "Brother_L6400_Linux2.deb" file. This second installer will actually create a printer but the settings are wrong.
2. Click on the "Start" menu in the bottom left corner, then select Administration -> Printers.
3. In the "Printers" window you'll see a printer labeled "HLL6400DW". Right-click on it and select "Properties".
4. Change the "Description" field to "CVS249A". Then in the "Device URI" field, click the "Change..." button to the right of it.
5. In the resulting window, click on the "Network Printer" option on the left to expand it, then select "LPD/LPR Host or Printer" from the list. Enter "cvs249a.cvs.rochester.edu" in the "Host:" field on the right, then click the "Probe" button. Once done probing, click the "Apply" button.
6. Back in the printer's properties folder, click the "Print Test Page" button. If a test page prints, you're good to go. Please note that a printer error notification may appear briefly when printing...the printer may be a little slow responding but will wake up and print.