Project

People Involved

Notes (include date and initials)

Documentation (link or where to find)

DDPI Mk1 - Dual Boot PC for New EyeRIS on DDPI MK1, I/O, Frame Grabber

Peter, Zoe, Ruei

DDPI Mk1 - Integration with new EyeRIS

Peter, Zoe, Ruei

possible new data stream for movement of stage

DDPI Mk1 - Training Materials

DDPI Mk1 - Quantization and other current tracking issues

Ruei

MAC - I think adding an IMU to each the helmet, bite bar, and camera platform might be helpful. To be discussed further

New EyeRIS - Set up two additional eyeris machines for development

New EyeRIS - Development of tools commonly used (Shader, Pest/adaptive procedures, recalibration, manual calibration, ...)

DDPI Mk2 - Optics and Mechanics, Usability

Ruei

DDPI Mk2 - Display (binocular / stereo)

Ruei

Coil - DAQ, Field Calibration

Coil - Experiments and Subjects

9/11/2020 - Peter, Ruei, ZZ currently working on coil poster mount, Coil color camera mount fix, Coil adjustable height table. Should be done by end of next week. Next step, Ashley and MAC will do another test run with all the tasks for timing purposes. -mac

Coil - Data Analysis

DDPI Algorithm - Smooth Pursuit Tracking

Bin, Ruei

On 340 Hz DDPI Mk1, On 1000 Hz DDPI Mk2

Artificial eye control

Ben, Ruei

DDPI Algorithm - Accommodation tracking

Ruei

DDPI Next Generation - Auto find the eye and focus, Head mounted, etc

Ruei

PhaseSpace setup

Howard, Zoe, Ruei

Displays - Inventory and Test

There are new monitors from fabebook that need to be characterized. Our current monitors page could also use a quick revision update -mac, 9/11/2020

SMI / Vivwe HTC

AO

Ben, Ruei

I'm still working on optical alignment for the AO system. We're also still waiting on some of the electronics hardware from the Roorda lab. Until we get all the required electronics, we can't do much with the system. As such, I don't foresee needing much involvement from other people for the next month or two (other than consulting with Ruei and having him help me with a few alignment procedures). There's an electronics subsystem that we'll need to assemble in a few weeks. I was planning to build it, but if there's someone else in the lab who is interested in this, it could be a nice stand-alone project. We also still need to design and build the bite bar assembly for subject alignment. There's a template from the Roorda lab, but we may need to modify it slightly for our application. Once again, this could be a nice stand-alone project for someone with CAD experience. And then once we get the whole system is up and running, I'll need help figuring out protocols for doing the imaging study. -Ben Moon, 9/10/2020

AO Page

EEG - Setup on DDPI, run with with New EyeRIS

MAC, ZZ

Waiting for I/O boards to be installed on either DDPI; Need also to think about monitor, CRT is probably best, but don't want to have to move CRT. -MAC, 9/11/2020

Shop - Setup and Fabrication Skills

Ruei